Category Archives: pros

Plaster Net: pros and cons

Modern repairs don’t do without using plaster, since the walls, floor and ceiling at the finished shape ought to be perfectly , be warmth and noise insulated, serve long and faithfully. If you don’t apply a layer of plaster over the wall, you won’t obtain the wanted effect. For the plaster layer to hold reliably, to not crack and not to fail, it is crucial to strengthen it. Such a fixing mechanism is the mesh.

If formerly used more primitive and inconvenient substances to fortify the surface below plaster, together with the advent of mesh made from new materials to work has come to be considerably more convenient and quicker. Plastering mesh could be made of various materials, have different cell size, shape and weight of their mesh. All this causes distinct results from its use.

Virtually every structure store now has a choice of mesh under the plaster, that have various lengths, making it feasible to choose the optimal amount of material needed for the work. The principle of working with it’s quite simple, which makes its use popular for the treatment of all chambers in the house, flat, office, getting excellent final results.

Plastering mesh is a very important element for your repair work, because with its use, the concluding of these walls is laid easier, and the result is much longer. After plastering with the mesh the wall isn’t going to change its properties, and for that reason the background won’t be jeopardized by rips at the joints or around the fabric itself. Painted walls are susceptible to the blemishes that look on them, so by picking this approach, it is very important to look after the reliability of the wall along with its own durability.

Any kind of cladding will be a lot more confidently attached to the surface, which can be properly handled, and also its service life will increase several times, if the surface has been fortified and protected from all types of influences and disagreeable environmental things.What to choose?

If we consider the metallic kind of grids, then you will find their own standards by which to choose one or the other choice. These comprise:

  • The superior characteristics of the raw material, that can be required for the manufacture of the pole or cable. It is desirable to get information concerning the alloy quality of the steel from which the mesh is created, which will show how high quality that the product is.
  • The cost of steel will likely be greater at small traders, therefore for large batches must apply to the companies which take action. Large turnover of this product gives an opportunity to recover it, and so do not exhibit too high a price.
  • The grade of the sticks themselves, the presence of galvanized coat. Non-galvanized mesh may be used for interior functions, if it’s used for outside rather than coated with a particular compound, it will corrode and traces of rust can reach the outer coating of finish.
  • It is required to pick the perfect type of grid. If it is welded, it is going to hold plaster greater than twisted. This is important when working with a brick wall or aerated concrete beyond the house, in which the plaster coating can reach appreciable size.
  • The sticks should have a distinctly rationed thickness of the sticks, so when selecting a net, you need to focus on the GOST norms in every single package.

Plastic variant of the grid for plaster is not inferior to any of the aforementioned choices, it may be used on any surface, indoors or out, for the plinth and facade. The only situation where it is worth turning all the exact same into the grid of steel, will be the existence of a thick layer of plaster, which includes a lot of weight, in the other conditions, contemporary grids will be more suitable to get the job done.

Employing a plastic version includes the option of the perfect size net, which is frequently decreased to worth 6 mm, however, you may select another alternative, depending on the requirements and convenience in the job.